fbpx

Hantek 6022be software windows 10

Looking for:

How to install Hantek Drivers on Windows 10 | Simply Smarter Circuitry Blog

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

BasicScope 1. BasicScope 0. I would like to Thank You for your software. It is an excellent software to troubleshoot electronics hantek 6022be software windows 10 moderns cars. The software is easy to use and everything needed is on the screen. No need to go trough pull down menus to save a trace.

I love the big buttons that are easier to see when I am working outside where computers screens are more difficult to see. Trigger button are excellent is easy to use. Your software is well designed for automotive work. With your software, I was able to easily see the following wave from : fuel injector wave form, primary ignition wave form, MAF mass air flow sensor wave form, TPS throttle body sensor wave form and cam sensor position wave form.

I have save all these wave form while I was doing preventive maintenance on my car. If you want them for your website I will happily send them to you. Glad it worked hantek 6022be software windows 10 for you. If you ever make it a business, you would want to get a better scope, of course. Hello, I have a BE model and I was wondering if this software could be made to work with this model. Almost as if the libraries were written перейти на страницу a completely different team.

However, the BasicScope source is open, so if anyone wants to try, they are more than welcome. Нажмите для деталей have it running on Windows Vista. Are you sure that the trigger is set so that there will be a display? Hello, thank you so much for your work on this! If it matters at all, the included software works for my scope just fine. I suspect this may be due to me having a 32 bit version of win10 installed. I get the error:. This may require a bit of detective work.

The first, easy thing to try, is once the Hantek software is working, try reinstalling BasicScope. Perhaps you страница tried that. Try looking in that directory, and make sure that the hantek 6022be software windows 10. It could also be that your antivirus software is somehow sandboxing or blocking the dll files from loading.

The dll files included with BasicScope definitely work with Windows XP and Windows 7 bit, but for Win 10, you may need later versions.

Might work, might not. Basicscope was compiled under Visual Studio Expresson a Windows 7 system. However, it should compile under newer versions of visual studio and Windows.

Besides the source files available on this page, you will also need the htmarch and htdisplay dll files, which are included with your Hantek BE unit, or can be downloaded from the Hantek website. Also on this page are documents which explain my best guess at how the Hantek library hantek 6022be software windows 10 work. Sorry, everything is in English. You must be logged in to post a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed. When enabled, every trace is hantek 6022be software windows 10 in data. No changes to actual BasicScope program. Window state Maximized, Normal, Minimized now saved. Added time indices and trigger info to CSV output file.

Larger markers, and smaller capture radius for dragging markers. Version 0. Otherwise identical to previous build. Hantek 6022be software windows 10 now is packaged in an installer. Tested on Windows 7 and works. Unzoom now restores original voltage settings of trace. This is a Hantek driver issue. Starting with version 0. It is possible to set a trigger level beyond full scale of the scope. You software is working very well on Window Log in to Reply.

I hantek 6022be software windows 10 do not use the scope due to the horrible usability of the supplied software. Thank you, Charlie. Leave a Reply Cancel reply You must be logged in to post a comment.

 
 

BasicScope | Alternative Software for the Hantek BE and BL Oscilloscope

 
Demo mode is provided by the -d or –demoMode command line option.

 

Hantek 6022be software windows 10.Openhantek

 

No support for non-Linux related issues unless a volunteer steps in! Work fast with our official CLI. Learn more. If nothing happens, download GitHub Desktop and try again. If nothing happens, download Xcode and try again. There was a problem preparing your codespace, please try again. Openhantek is a project where people from all over the world collaborate peacefully, regardless of where they live.

If you are lucky enough to live in peace, please donate to the International Committee of the Red Cross. This project gives no support for its currently unmaintained predecessor openhantek. Demo mode is provided by the -d or –demoMode command line option. Fully supported operating system: Linux; developed under debian stable currently bullseye for amd64 architecture. Raspberry Pi packages raspbian stable are available on the Releases page, check this setup requirement. Uses free open source firmware , no longer dependent on nonfree Hantek firmware.

Extensive User Manual with technical specs and schematics. A little HW modification adds AC coupling. OpenHantek supports this feature since v2. This status badge here and on top show the build status. The preferred way to run OpenHantek is to build it from source on your system, especially under Linux.

The easiest way to get an up-to-date working code base is to clone the code from here via. You can explore the look and feel of OpenHantek without the need for real scope hardware by running it from the command line as: OpenHantek –demoMode.

The oscilloscope has quite a large zero point error. To calibrate the offset quickly, simply proceed as follows:. OpenHantek uses the OpenGL graphics library to display the data. OpenGL is selected by default, but if this does not work i. Note: With alternative i , the Device Manager will show under “Universal Serial Bus devices” the name and state according to the firmware loaded e.

Hantek BE sigrok. The scope doesn’t store the firmware permanently in flash or eeprom, it must be uploaded after each power-up and is kept in ram ’til power-down.

If the scope was used with a different software old openhantek, sigrok or the windows software the scope must be unplugged and replugged one-time before using it with OpenHantek to enable the automatic loading of the correct firmware. The top line of the program must display the correct firmware version FW I use this project mainly to explore how DSP software can improve and extend the limitations of this kind of low level hardware.

It would have been easy to spend a few bucks more to buy a powerful scope – but it would be much less fun : Please refer also to the developer info. We welcome any reported GitHub issue if you have a problem with this software.

Send us a pull request for enhancements and fixes. Some random notes:. Skip to content. Star License View license. I installed the software and drivers on the Ideapad and was using the scope successfully until today.

Last night I was working on a project using the scope, and approching the wee hours decidet to rest, and simply closed the lid on the Ideapad to put it in sleep mode, so I wouldn’t need to set things back up in the morning. When I did wake the machine, the Hantek ocilloscope was on the screen, but it wasn’t operable. I then received a bsod inidcating that an unknown error had occured and the system would restart and a log sent to Microsoft. Since then I have not been able to get the Ocilloscope to work.

I’ve uninstalled both the device and the software several times, rebooting between steps. It still functions on the other T machine. The usb ports are functioning. The listing of the BE in device manager shows a caution triangle and states that an unsigned driver has been provided.

It seems to indicate the driver was installed but I’m not sure how to tell. Research fouild that unsigned drivers have been problematic for Windows 10 OS, and Hantek was working on a new driver. These two files were corrupted. I have installed LibusbK using zadig Then i shut down the computer and restart.

OpenHantek-Win-xRelease-b67 had been installed before. Every thing up to now seem OK. To morrow, i will begin the tests, and i will give you more information later. Hi raxis13, I’m happy to read that you found a solution. I also checked the Zadig solution some days ago on a virtual win7 test installation and now found some time to rework the documentation on github accordingly.

Please test and report, I’m also interested in your opinion about the FFT and signal processing because you mentioned that you don’t like Hantek’s original software that I don’t know as I do not use windows.

Hi Martin, I needed to insert images into my reply, but I am not familiar with the post, so i produce a pdf file that i attached to my post. OpenHantek Reply to Martin Hi Raxis13, Thank you for testing so thoroughly! The OpenHantek project started as a linux software to handle Hantek DSOs of the and the line, support was added later. As is different to 2xxx and 5xxx the program had a lot of compromises. After the original maintainer of the github repo resigned I cloned it and removed all non stuff — development is still under linux.

MacOSX and Windows builds are created by CI continuous integration tools travis and appveyor, but untested unless sometimes a short win check in a virtual win7 machine. So I cannot help with win installation.

To the program itself. Its display was designed to resemble a real HW scope so that everybody who had used a scope before even an old analog non-storage scope should be familiar with this SW. Also if you do some checks be sure to know what signals you are using, either by using a well known signal, e. Where did you get this signal? From the screen shots I suspect you took the calibration output of the scope and selected 50 Hz.

The trigger level in Volt can be adjusted with the small red arrow on the right side, the trigger time position on the screen So we should have 1 microsecond by div. Problem, or not? Please look at my screen shots some posts above. The display has 10 time divisions and 8 voltage divisions the dotted lines, just like a real scope. Or normally I should have 1 microsecond.

What is wrong? Seem very insufficient for a 1 MHz signal No, 20ms equates the 50 Hz. You have to do it only once, the program stores the positions. You can see the small red rectangle in the middle of the red trace on your big screen shot, and the measured values Play around to get used to it, I never touched this software region.

In addition we can use a csv file, with all the results. Where is defined the width of the signal used for the FFT calculus? How do you define dB for spectrum? The FFT is calculated always over the complete 20 kSamples. CSV file : what are the units for t, V, f?

Is this useful? Validity of the calcul : – problem : positive values founded lines , ,… with control value as indicated on the display image. I repeated the test several times Timebase ms and I found always the same problem. This setting is used together with the provided scope probes set to X10 to display the real voltage at the tip of the probe.

But no problem with Timebase 10 or 20 ms.

 
 

Enter the text or HTML code here

Leave a Comment

Your email address will not be published. Required fields are marked *

Free No Obligation Quote

We have something to suit every budget

Call Now Button